|
 |
|
|
|
|
Gear
Pelletizer „G“
Low pressure extrusion of stable pellets
Underneath the feed hopper a pair of toothed rolls counter rotate.
The rolls draw the product in and press it out through the nozzles
between the teeth.
Granulating rolls with different nozzles.The press nozzles can
be bored directly into the press rolls or the rolls can be equipped
with exchangeable nozzle plates.
The densification is determined by the relation between nozzle
diameter and nozzle length.
The nozzle diameters range from 1 to 10 mm.
The machines are dust and gas tight. An operation under inert
gas and with solvents is problem free.
All parts in contact with the product meet the demands of the
pharmaceutical industry and conform to FDA.
Heavy duty design with drive in the middle for large capacities.
(Twin load)
|
|
|
|
